Surveillance System with Motion Detection and Push Notification Test phase, srs, design phase and code final deliverable
Get paid solution for this project including srs document, design document, test phase document,
final report software, presentation and final code. Mail on projecthelp77@gmail.com
Project Domain / Category:
IOT
Abstract/Introduction:
With the passage of time importance of surveillance device has been multiplied substantially and plenty of innovations were made on this motive which is vastly
dependent on IOT. Taking gain of portability of raspberry pi we will use it as surveillance micro-controller. We will make an effective surveillance gadget the use of as a minimum one Camera and Raspberry Pi micro-controller.
The concept of this undertaking is to make a surveillance system with movement detection and push notification using raspberry pi micro-controller and at least one digicam. This surveillance machine will automatically come across movement in a real-time and begins recording and tracking as soon as movement is detected. When motion is deducted a push, notification need to be despatched to the authorized individual to alert him. Video recordings which are being stored to local garage desires to b upload on google pressure and this have to be automated. Authorize Person can see the stay flow at any browser and at any time.
Functional Requirements:
• Video recording on Motion Detection Recording
• Provides live flow on any internet browser and everywhere.
• Enable Push Notification to authorized person whilst motion is deducted.
• Save the recorded video on neighborhood storage
• Upload recorded video from local garage to cloud garage i.E. Google Drive
Hardware Requirements: (Please notice that No Hardware could be furnished by the university)
• Raspberry pi micro-controller (Better use the today’s model).
• Camera Module (You can use any of the following camera indexed below): I. Rev 1.3
II. Camera 2.1
III. Any USB Camera (Using USB digital camera could be DIY and little bit difficult to configure)
• Micro SD card
• Micro USB power supply (2.1 A)
• Camera Mounting
• Wiring and connectors.
• Components like resistors, capacitors and transistors if required.
• Power Supply for Raspberry Pi micro-controller.
Important Notes:
• Prior Knowledge of Raspberry Pi micro-controller could be very critical.
• Without Raspberry pi the mission will no longer be widely wide-spread.
• You can use external libraries for motion detection and for uploading content to cloud garage. You need to make sure the whole thing you do you are aware of it nicely.
Technologies:
• Python
Supervisor:
Name: Muhammad Zamar Khan
Email ID: zamar.Khan@vu.Edu.Pk
Skype ID: zamar.Khan@stay.Com