Smart Smoke and Gas Leakage Detection System Test phase, srs, design phase and source code final deliverable

Smart Smoke and Gas Leakage Detection System Test phase, srs, design phase and source code final deliverable

Project Domain/Category:
IoT/Embedded system programming

Abstract/Introduction:
Gas detectors were extensively used inside the enterprise relying on their characteristics. Such that which kind of gas they can detect like LPG (in case of cylinders), another unsafe/flammable gas or they can be used to stumble on the toxic gasoline etc. Also, the gasoline detectors may be fixed or transportable method they can be capable of flow around inside the space in which required. They may be applicable on a huge scale like in industries; hospitals etc. Or they may be miniaturized to be used in home safety such as in kitchen or in some other room. Our concept is to broaden a smoke and gas leakage detector that may locate the leakage of herbal gas used usually in almost each residence in stoves in Pakistan.

An IoT based totally smart sensor device must be advanced to triumph over the above-noted issue. We will use Arduino Uno so that it will serve as a microcontroller. The IDE aids in programming the preparation written as C++ code for the Arduino board. It can relate with the LEDs, motors, buttons, Wi-Fi module and so forth. As quickly as the fire is detected, the sign may be sent to the micro-controller for you to then ship appropriate information to the LCD and the GSM/Wi-Fi module.
The notification about the smoke/gas leakage is then despatched to the person or the associates thru a mobile software. So, an android based totally mobile software desires to be advanced for this purpose.

Functional Requirements:
Hardware Module:
Smart smoke and gas leakage detector might be specially composed of the subsequent additives:
• Arduino UNO
• Buzzer
• MQ five (smoke and gas sensor)
• Node MCU
• 2 channel Relay module
• Vero board
• Jumper wires

Mobile Application (Android):
• The application ought to be capable of generate signals to the user and/or the friends, so that appropriate action ought to be taken.
• Alerts need to also be sent to the Rescue team via SMS & Voice Call (Automated Call recording)

Tools:
• Arduino UNO kit or another unmarried board processor (e.G. Raspberry pie)
• Circuit components (as given in useful requirements)
• Smoke/Gas sensor

• GPS module
• GSM/Wi-Fi module
• Android Studio
• Web APIs
• C/C++ programming.
• (Arduino.Cc) IDE may also be used.
Actual Figure of Hardware:

Important Note:
The university isn’t answerable for presenting the hardware / software for this task. You are required to arrange / buy them by means of your own. Be safe and trying experimenting or testing this app very cautiously. The university and undertaking manager aren’t liable for any damage / loss in any case.

Supervisor:
Name: Sonia Salman